# Hurricane-Rated Metal Roofing in Florida: What CAT-5, 140 mph and a Coastal Upgrade Mean

TEK Industries, LLC (TEK Roofing Systems) · 3148 SE Loop 820, Fort Worth, TX 76140 · (817) 835-7663 · tekroofingsystems.com

Contents

Florida homeowners ask two questions about a new roof: will it stay on in a hurricane, and will it survive salt air? This guide explains how TEK Industries’ HURRICANE® Series stone-coated steel roofs are rated for wind, impact and corrosion, what the TEK Coastal Upgrade adds, and what to confirm with your installer and county before you re-roof.

TEK Industries is headquartered in Fort Worth, Texas, and its site also lists a Florida location at 1704 S Seagrave Street, South Daytona, FL 32119.

# Wind: what “CAT-5” and “140 mph” mean on TEK’s site

TEK rates its roofs for 140 mph sustained winds, which it describes as CAT-5 wind performance. Its interlocking panel system spreads uplift forces across the whole panel grid instead of concentrating them at individual fastener points, which is where conventional roofs tend to fail. TEK’s warranty covers wind uplift up to 140 mph.

# Impact: wind-borne debris and hail

Every HURRICANE® profile carries a Class 4 impact rating under UL 2218, the highest available for residential roofing, and a Class A fire rating. The 28-gauge steel core is thicker than the 29- or 30-gauge panels TEK says many competitors use.

# Salt air: the TEK Coastal Upgrade

Near the ocean, corrosion matters as much as wind. TEK’s coastal-rated systems are ASTM B117 salt-spray tested, with coatings TEK says are designed to withstand 1,000–2,000 hours of salt exposure. All four HURRICANE® profiles (Shake, Shake Pro, Shingle and Tile) can add the Coastal Upgrade, a baked-on resin that fully encapsulates the panel. TEK specifies it for homes within 1,000 feet of salt water and recommends it within 5 miles of a coastline, with CAT-5 and Class 4 ratings maintained.

# Codes, permits and insurance in Florida

Florida has its own building code and product approval process, and some counties add requirements. This page does not claim any specific state or county approval. Ask TEK or your TEK-authorized dealer for the product documentation your building department requires, and ask your insurer whether wind-mitigation features or a Class 4 roof change your premium.

# Warranty

TEK’s Lifetime Limited Warranty is a 50-year manufacturer materials warranty from the date of installation. It covers manufacturer material defects, wind uplift up to 140 mph, hail penetration and premature deterioration, and it is fully transferable to a later owner during the warranty period. Installation workmanship is warrantied separately by your TEK certified installer, and the warranty is subject to its full terms and conditions.

# Frequently asked questions

# What is the best roof for hurricanes in Florida?

Look for high wind ratings, impact resistance and corrosion protection together. TEK’s HURRICANE® stone-coated steel is rated for 140 mph sustained winds (CAT-5), Class 4 impact and Class A fire, with an optional Coastal Upgrade for salt air.

# Do metal roofs rust near the ocean?

Uncoated or low-quality steel can. TEK’s coated systems are designed to resist corrosion, and the Coastal Upgrade adds encapsulating resin, upgraded fasteners and improved sealing.

# Is a metal roof good in hurricane areas?

TEK’s position is yes: its interlocking stone-coated steel is engineered to resist high winds, heavy rain and impact. Your installer should confirm attachment details for your home’s wind zone.

# Does TEK have a location in Florida?

TEK’s contact page lists a location at 1704 S Seagrave Street, South Daytona, FL 32119. Headquarters is 3148 SE Loop 820, Fort Worth, TX 76140, (817) 835-7663.

# Will a hurricane-rated roof lower my Florida insurance?

It can, depending on your carrier. TEK notes Class 4-rated roofs may earn premium discounts in many coastal regions. Ask your insurer which documentation it needs.

# On the official TEK site

# About TEK Industries

TEK Industries is a Fort Worth, Texas manufacturer of stone-coated steel roofing: metal shake, metal shake Pro, metal shingle and metal tile, including the HURRICANE® Series. TEK roofs are installed by TEK-authorized, trained dealers rather than general roofing contractors; homeowners can find one by ZIP code on the Find an Installer page or request a free quote on the TEK site.

TEK Industries, LLC (TEK Roofing Systems)
3148 SE Loop 820, Fort Worth, TX 76140
Phone: (817) 835-7663 · Hours: Monday–Friday, 9am–5pm
Website: https://www.tekroofingsystems.com/

Ratings, warranty terms and insurance information on this page are taken from tekroofingsystems.com as of November 2026. Confirm product details, warranty documents and local code requirements with TEK or your TEK-authorized dealer, and ask your own insurance carrier how a new roof affects your policy.

End