lucid.page Reading Sine and Cosine From a Point on the Unit Circle
Text size
Read time3 min

# Reading Sine and Cosine From a Point on the Unit Circle

By Peter Novak

Contents

The unit circle is the circle of radius 1 centered at the origin. If a ray from the origin makes an angle t with the positive x-axis, and it meets the circle at the point (x, y), then by definition cos t = x and sin t = y. The tangent, when it exists, is y/x. This is the cleanest way to remember the signs of the trigonometric functions in the four quadrants, and it is also how the values at the special angles are obtained.

The point for t = 0 is (1, 0), so cos 0 = 1 and sin 0 = 0. The point for t = pi/2 is (0, 1), so cosine is 0 and sine is 1. At t = pi the point is (-1, 0), and at t = 3pi/2 it is (0, -1). Already you can see that cosine is negative in the second and third quadrants, where x is negative, and sine is negative in the third and fourth, where y is negative.

The special angle pi/6, or 30 degrees, meets the circle at (sqrt(3)/2, 1/2). So cos(pi/6) = sqrt(3)/2 and sin(pi/6) = 1/2. The complementary angle pi/3, or 60 degrees, swaps those coordinates: (1/2, sqrt(3)/2). The angle pi/4, or 45 degrees, meets the circle at (sqrt(2)/2, sqrt(2)/2). Once those three first-quadrant points are memorized, the rest of the standard angles are reflections. For 5pi/6, which is 150 degrees, the reference angle is pi/6, and the point is in the second quadrant, so the coordinates are (-sqrt(3)/2, 1/2). For 7pi/4, or 315 degrees, the reference angle is pi/4 and the point is in the fourth quadrant: (sqrt(2)/2, -sqrt(2)/2).

Because x^2 + y^2 = 1 on the unit circle, the identity cos^2 t + sin^2 t = 1 is immediate. It is not an extra fact to store separately; it is the equation of the circle. If you ever compute a sine and a cosine at the same angle and the squares do not add to 1, at least one of the two values is wrong.

A related point is that adding 2pi, or 360 degrees, returns you to the same point, so the sine and cosine are periodic with period 2pi. Adding pi sends you to the opposite point (-x, -y), which is why sin(t + pi) = -sin t and cos(t + pi) = -cos t.

When you want to confirm a coordinate at a particular angle, a math solver can check the sine and cosine. I would still sketch the angle, name the quadrant, and write the reference-angle values with the correct signs. That small drawing is usually enough to keep a 150-degree cosine from being written as a positive number.

End