lucid.page How to Connect a GFCI to a Single-Phase Electrical System
Text size
Read time3 min

# How to Connect a GFCI to a Single-Phase Electrical System

How to Connect a GFCI to a Single-Phase Electrical System WITHOUT GROUNDING WITH GROUNDING Let’s start by answering a frequently asked question: “Does a GFCI work without grounding?” Yes, it does function, but only when a person touches the device’s metal casing that has become energized. In this scenario, the leakage current flows to “ground” through the person’s body (see the principle of operation of a Ground Fault Circuit Interrupter or GFCI). If the device has a trip current below a dangerous level for humans, such as 5 mA or 15 mA, there will be no harm. However, using devices rated for 100 mA or higher can be dangerous upon such contact. Therefore, installing a GFCI without grounding is possible. This is commonly done in areas where a grounding system is absent, such as: Apartments in older residential buildings (e.g., walk-up apartments) Cabins Private homes where grounding was not implemented for specific reasons This approach is both effective and beneficial from an electrical safety standpoint, especially when using electrical tools on 120V outdoors. At my cabin, I installed a GFCI without grounding, and it worked perfectly. I verified this by attempting to connect a well pump during a rainstorm using an extension cord (I know it wasn’t the correct method, but it worked). Interestingly, in this case, the leakage could have flowed to the ground not necessarily through me but also through the wire. The fact remains that this method works and provides protection. Let’s examine the corresponding diagram for a single-phase system and the operational principle of a GFCI in this setup. In the diagrams, the following symbols are used: GFCI: Ground Fault Circuit Interrupter Single-Pole Circuit Breaker: Protects a single conductor Double-Pole Circuit Breaker: Protects two conductors CONNECTING A GFCI WITHOUT GROUNDING First, let’s explain how a GFCI operates in a single-phase electrical system without grounding (see Figure 1a). How a GFCI Works Without Grounding The condition for a GFCI not to trip is that the incoming and outgoing currents are equal: I1=I2I_1 = I_2I1​=I2​This condition is met: Under normal operation of connected electrical equipment When there is a fault to the casing, but no electrical connection between the casing and the “ground” However, when a person touches a faulty electrical device, their body creates a path for leakage: I3I_3I3​This disrupts the current balance: I1+I3=I2I_1 + I_3 = I_2I1​+I3​=I2​causing the GFCI to trip. Thus, connecting a single-phase GFCI in an ungrounded system is done according to the scheme shown in Figure 1b. CONNECTING A GFCI WITH GROUNDING Interestingly, the connection method remains unchanged when grounding is present.

Contents

For related product selection, see Electrical Cables and Wires.

A relevant Safsale product example is Cables & Installation Supplies.

For an adjacent option, see Combined Cables for Video Surveillance.

Original technical guide: Safsale Smart Link Academy

Safsale: safsale.com

End