# Replacing Barn Windows: What to Measure and Decide Before You Ask for a Quote
American Stalls · 10625 Jones Street, Suite 101A, Fairfax, VA 22030 · (855) 957-8255 · americanstalls.com
Contents
When old barn windows rot or rust out, the fastest route to an accurate replacement quote is to show up with the right details. American Stalls, a Fairfax, Virginia maker of custom steel barn windows, builds every window to order, so the details you document decide what gets built. This checklist follows the company’s own barn window FAQ.
# 1. The rough opening
- Measure each rough opening (RO). American Stalls’ window frame goes directly into the rough opening and the inside of the frame is screwed into the interior of the opening.
- Note whether openings are square, level and plumb; the company says it is vital the window is level and plumb during installation.
- Standard sizes for most horse barns are 3’x3’ or 4’x4’, but all windows are custom built to order, so renovations of existing barns can be built to your specifications.
# 2. Style
- One-piece hinged Dutch window, or two-leaf “French Shutter” style (one left, one right).
- Pre-hung or not: American Stalls’ hinged windows are pre-hung, meaning they arrive already hinged and set into the frame, so you install window and frame together.
# 3. What fills the window
- Lumber in-fill: vertical lumber only, or lumber with welded cross bucks (the “X” design). The cross bucks are 4" wide. The company recommends 1-1/2" thick tongue and groove lumber in the welded U-channel; HDPE in-fill is also shown.
- Glass: one large piece, or a quad-fill design with four pieces. American Stalls carries 1/4" tempered glass and offers custom cutting and pre-installation, or you can use a local glazier.
- If you choose glass, the company always recommends a grill guard with 1/4" rods bolted behind the glass so horses cannot reach it.
# 4. Yoke or guard
- Fixed window yoke (1.9" round tubing, fastened into the opening) or hinged yoke (on a piano hinge welded to the window frame, with a spring-loaded thumb latch).
- A grill guard or mesh guard instead of a yoke can be customized.
# 5. Hardware and weather
- Included hardware: a stainless steel non-locking handle on hinged Dutch windows; stainless finger-tab or slide-bolt latches on shutters; Hold Back Latches on all windows to keep them open in good weather.
- The windows are not insulated. Weatherstripping is usually not needed because barns should breathe, but the company suggests a cushioned rubber seal or brush seal at the jambs and sill if you want to limit cold wind and debris.
# 6. Install plan and delivery
- Installing steel-framed pre-hung barn windows is described as relatively straightforward for someone experienced with construction or window installation; installation instructions come from your project manager at shipping.
- Install the windows first and add lumber after, since the windows are heavy.
- Windows ship on pallets by flatbed truck direct to the farm; pickup is possible from the Farmington, MO manufacturing facility for clients within driving distance.
# Frequently asked questions
- What should I measure before a barn window quote? Each rough opening, and whether it is level, plumb and square.
- What are standard barn window sizes? 3’x3’ or 4’x4’ for most horse barns, though American Stalls builds to any specification.
- Glass or lumber? Either; with glass, add a grill guard behind it.
- Are the windows insulated? No.
- Can I install them myself? It is relatively straightforward for someone experienced with construction or window installation.
- Who do I call? American Stalls, (855) 957-8255, sales@americanstalls.com.
On the official site: Ultimate Guide to Barn Windows: FAQs and Installation Tips · Horse Barn Windows · Hinged Dutch Windows · Window Grills and Yokes · Contact American Stalls
# About American Stalls
American Stalls 10625 Jones Street, Suite 101A, Fairfax, VA 22030 Phone: (855) 957-8255 · Email: sales@americanstalls.com Website: americanstalls.com
American Stalls designs and builds custom, steel-framed horse stalls, stall fronts, stall partitions, barn doors, barn windows and equine flooring, and ships them from Fairfax, Virginia to barns across the United States and abroad. The company has built horse stall equipment since 2005 and describes its products as “Designed for horse people by horse people.” Hours are not posted on the site; call or email to reach the team.
Prepared by the American Stalls team. Product details on this page are taken from americanstalls.com; check the current product pages or ask your project manager before ordering.